Brother PE-Design Next Instruction Manual page 141

2.
Specify the desired settings in the Portrait
Properties dialog box, and then click OK.
(9)
(1)
(2)
(8)
(3)
(4)
(5)
(6)
(7)
(1) Face tab: Select the shape of each part of
the portrait.
(2) Facial Feature: Select the overall contour
(appearance).
(3) Part: select the part to be changed.
(4) Part Variation: Select the variation for the
part selected in (3).
(5) Displays a variations list for the part
selected in (3).
• Select a part from the list, and then click OK.
• With the Display With Other Parts check box,
select whether to display only the selected part
or all parts combined.
(6) Part Feature: select a part feature.
(7) Change Both Left and Right: Select
whether or not the same shape is
selected for the left and right eyes and
ears.
(8) Displays the selected parts.
Click a part to select it. Double-click a part
to display a variations list for that part.
Importing Image Data
(9) Color tab: Select the color of each part of
the portrait.
(9)
(10)
(11)
(12)
(13)
(17)
(10) Hair: Select the hair color.
(11) Face: Select the face color.
(12) Mouth: Select the mouth color.
(13) Moustache/Beard: Select the
moustache/beard color.
(14) Outline: Select the outline color.
(15) Eye: Select the eye color.
(16) Eyebrows: Select the eyebrow color.
(17) Create a Color: Add a specified color to
the color list selector. Specify the color in
the dialog box that appeared when
Create a Color was clicked, and then
click OK.
 The portrait image is displayed in the
Design Page.
Importing image from the
clipboard
Click 1, then 2, then 3.
1
2
3
 The image on the clipboard is imported
into the Design Page.
a
Note:
This can only be done when there is image
data on the Clipboard.
(14)
(15)
(16)
139