Brother PE-Design Next Instruction Manual page 148

Tutorial 7: Print and Stitch
Step 4 Embroidering
1
If an iron-on transfer sheet is used, transfer
the image onto fabric.
b
Memo:
For details on transferring from iron-on
transfer sheets, refer to the instructions for the
iron-on transfer sheets.
2
Hoop the fabric in the embroidery frame.
3
Place the positioning sheet on the fabric to be
embroidered so that it is aligned with the
printed image.
• If the positioning sheet is too large, cut it to
an appropriate size so it can easily be used
for aligning the positions.
• Tape the positioning sheet to the fabric to
secure it in place.
4
Attach the embroidery frame to the
embroidery machine.
Be sure that the positioning sheet does not
move out of place.
146
5
Align the needle with the mark at the center of
the positioning sheet.
• If the embroidery machine has a built-in
camera, press the start positioning button
to detect the positioning mark and
automatically align the embroidering
position.
• With other embroidery machines, manually
align the positions.
6
After positioning is finished, remove the
positioning sheet from the fabric.
7
Start the embroidery machine to embroider
the pattern.
b
Memo:
• For details on using the embroidery
machine, refer to the Operation Manual
included with the machine.
• Six patterns of completed samples for Print
and Stitch are provided in the following
folder.
Documents (My Documents)\
PE-DESIGN NEXT\Sample\Layout &
Editing\Print and Stitch