Table of Contents
Advertisement
PeDesignV6Eng.book Page 34 Thursday, July 8, 2004 11:59 AM
b
Memo:
Various settings are available for converting
the line image to a figure handle image. (For
more details on the various settings, refer to
page 76.) In addition, this dialog box allows
you to preview how the image will fit in the
selected Design Page (the size of the area to
be sewn).
2.
Click OK.
→ The line image is converted to a figure
handle image, which is displayed in the
Design Page.
b
Memo:
• The Tool Box for stage 3 (Figure Handle
stage) contains various editing tools for
drawing lines, moving, deleting or inserting
points as well as zooming. For details on
the editing tools, refer to page 234.
• At this time, you can change the Design
Page properties by using the menu
command Option – Design Page
Property. (For more details, refer to
page 77.)
Step 6
Continuing to stage 4 (Sew
Setting stage)
1.
Click Stage on the menu bar, and then click
To Sew Setting.
An alternate method is to click the Toolbar
button indicated below.
34
Creating and Editing Embroidery Patterns
To Sew Setting
→ The Tool Box for stage 4 (Sew Setting
stage) appears.
In this stage, you can set and check the
sewing attributes for each part of the pattern.
You can also specify hole sewing for larger
regions that completely enclose smaller ones
in order to avoid sewing the same region
twice. Other tools are available for zooming.
b
Memo:
• To zoom in (or out), click
the Tool Box, and then click the desired
area of the embroidery pattern, as in stage
3 (Figure Handle stage).
• To display the Design Page so that it fits
the window, click
Step 7
Specifying sewing attributes
We are now going to apply sewing attributes to
the different parts of the pattern.
■
Specifying sewing attributes for
the outline
1.
Click
on the Tool Box.
(or
) on
on the Tool Box.
Hide quick links:
Advertisement
Table of Contents
