ProSafe Managed Switch
Time-Based Sampling of Counters with sFlow
CLI: Configure Time-Based Sampling of Counters with sFlow
1.
Configure the sampling port sFlow receiver index, and polling interval. You need to
repeat this for all the ports to be polled.
(Netgear Switch) (Config)# interface 1/0/1
(Netgear Switch) (Interface 1/0/1)# sflow poller 1
(Netgear Switch) (Interface 1/0/1)# sflow poller interval
2.
View the polling port configurations.
(GSM7328S) #show sflow pollers
Poller
Data Source
-----------
1/0/1
Web Interface: Configure Time-Based Sampling of Counters
with sFlow
1.
Configure thesampling ports sFlow receiver index, and polling interval.
a. Select Monitoring > sFlow > Advanced > sFlow Interface Configuration.
b. Select the Interface 1/0/1 check box.
c. In the Poller Interval field, enter 300. A screen similar to the following displays.
d. Click Apply.
Receiver
Index
Interval
---------
1
300
Poller
---------
300
Chapter 20. SNMP
| 345