a. Select Routing > Multicast > Global Configuration. A screen similar to the following
displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
7.
Enable PIM-DM globally.
a. Select Routing > Multicast > PIM > Global Configuration. A screen similar to the
following displays.
b. For PIM Protocol Type, select the PIM-DM radio button.
c. For Admin Mode, select the Enable radio button.
d. Click Apply.
8.
Enable PIM-DM on interfaces 1/0/21 and 1/0/22.
420 |
Chapter 28. PIM
ProSafe Managed Switch