NETGEAR ProSafe GSM5212P Software Administration Manual page 380

Web Interface: Configure Multiple STP (802.1s)
1. Enable 802.1s on the switch.
a. Select Switching > STP > STP Configuration. A screen similar to the following
displays.
b. Enter the following information:
• For Spanning Tree Admin Mode, select the Enable radio button.
• For Force Protocol Version, select the IEEE 802.1s radio button.
c. Click Apply.
2. Configure MST.
a. Select Switching > STP > MST Configuration. A screen similar to the following
displays.
b. Configure MST ID 1.
• In the MST ID field, enter 1.
• In the Priority field, enter 4096.
380 | Chapter 25. Spanning Tree Protocol
ProSafe Managed Switch