NETGEAR ProSafe GSM5212P Software Administration Manual page 224

c. Click Add.
3. Enable the IGMP snooping querier globally.
a. Select Switching > Multicast > IGMP Snooping > IGMP VLAN Configuration. A
screen similar to the following displays.
b. Enter the following information:
• For Querier Admin Mode, select the Enable radio button.
• In the Querier IP Address field, enter 10.10.10.1.
c. Click Apply.
4. Enable the IGMP snooping querier on VLAN 1.
a. Select Switching > Multicast > IGMP Snooping Querier VLAN Configuration. A
screen similar to the following displays.
b. In the VLAN ID field, enter 1.
5. Click Add.
224 | Chapter 13. IGMP Snooping and Querier
ProSafe Managed Switch