NETGEAR ProSafe GSM5212P Software Administration Manual page 368

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the

following displays.

b. Under VLAN Configuration, enter the following information:

In the VLAN ID field, enter 200.

In the VLAN Name field, enter vlan200.

In the VLAN Type field, select Static.

c. Click Add.

Add ports 24 and 48 to VLAN 200.

a. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the

following displays.

b. Under VLAN Membership, in the VLAN ID field, select 200.

c. Click Unit 1. The ports display:

Click the gray box under port 24 twice until U displays. The U specifies that the

egress packet is untagged for the port.

Chapter 24. Double VLANs and Private VLAN Groups

ProSafe Managed Switch