ProSafe Managed Switch
Web Interface: Enable RIP for Ports 1/0/2 and 1/0/3
1.
Select Routing > RIP > Advanced > RIP Configuration. A screen similar to the
following displays.
2.
Enter the following information:
•
In the Interface field, select 1/0/2.
•
For RIP Admin Mode, select the Enable radio button.
•
In the Send Version field, select RIP-2.
3.
Click Apply to save the settings.
4.
Select Routing > RIP > Advanced > RIP Configuration. A screen similar to the following
displays.
5.
Enter the following information:
•
In the Interface field, select 1/0/3.
•
For RIP Admin Mode, select the Enable radio button.
•
In the Send Version list, select RIP-2.
Chapter 6. RIP
| 59