NETGEAR ProSafe GSM5212P Software Administration Manual page 402

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

a. Select Routing > IPv6 > Advanced > Interface Configuration. A screen similar to

the following displays.

<<client-Ipv6 interface.bmp>>

b. Scroll down and select the interface 1/0/23 check box. Now 1/0/23 appears in the

Interface field at the top.

c. Enter the following information:

In the IPv6 Mode field, select Enable.

In the Routing Mode field, select Enable.

In the DHCPv6 Client Mode field, select Enable.

d. Click Apply to apply the settings.

Show the ipv6 address assigned from 1/0/23.

a. Select Routing > IPv6 > Advanced > Prefix Configuration. A screen similar to the

following displays.

b. Scroll down and select the interface 1/0/23. You can see the IPv6 address assigned

by the DHCPv6 server.

Chapter 27. IPv6 Interface Configuration

ProSafe Managed Switch