NETGEAR ProSafe GSM5212P Software Administration Manual page 236

6. Show the MVR status.
(Netgear Switch) #show mvr
MVR Running....................... TRUE
MVR multicast VLAN................ 999
MVR Max Multicast Groups.......... 256
MVR Current multicast groups...... 1
MVR Global query response time.... 5 (tenths of sec)
MVR Mode.......................... compatible
(Netgear Switch) #show mvr interface
Port
-----------
0/1 RECEIVER
0/5 RECEIVER
0/7 RECEIVER
0/9 SOURCE
7. After port 0/1 receive IGMP report for Multicast Group 224.1.2.3, it will be added to the MVR
Group 224.1.2.3.
(Netgear Switch) #show mvr members
MVR Group IP
---------------
224.1.2.3
Web Interface: Configure MVR in Dynamic Mode
1. Create MVLAN 999, VLAN1 1001, VLAN2 1002, and VLAN3 1003.
a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the
following displays:
b. In the VLAN ID field, enter 999, and in the VLAN Name field, enter mVlan.
c. Click Add.
d. Repeat step b and c to create VLAN1 1001, VLAN2 1002, and VLAN3 1003.
e. Add port 9 into MVLAN 999 with tagged mode.
236 | Chapter 14. MVR (Multicast VLAN Registration)
Type Status
---------------
ACTIVE/InVLAN
ACTIVE/InVLAN
ACTIVE/InVLAN
ACTIVE/InVLAN
Status
---------------
ACTIVE
Immediate Leave
-------------------
DISABLED
DISABLED
DISABLED
DISABLED
Members
-------------------------------------
0/1(d)
ProSafe Managed Switch
---------------