•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
5.
Enable RIP on interface 1/0/1.
a. Select Routing > RIP > Advanced > Interface Configuration. A screen similar to
the following displays.
b. In the Interface field, select 1/0/1.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
6.
Enable RIP on interface 1/0/9.
a. Select Routing > RIP > Advanced > Interface Configuration. A screen similar to
the following displays.
b. In the Interface field, select 1/0/9.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
7.
Enable RIP on interface 1/0/13.
434 |
Chapter 28. PIM
ProSafe Managed Switch