NETGEAR ProSafe GSM5212P Software Administration Manual page 209

ProSafe Managed Switch
means these packets will be the last packets to be dropped in the event of congestion
beyond the policed rate.
(Netgear Switch) (Config)#policy-map policy_vlan in
(Netgear Switch) (Config-policy-map)#class class_vlan
(Netgear Switch) (Config-policy-classmap)#police-simple 1000 64 conform-action transmit
violate-action drop
(Netgear Switch) (Config-policy-classmap)#conform-color class_color
(Netgear Switch) (Config-policy-classmap)#exit
(Netgear Switch) (Config-policy-map)#exit
4. Apply this policy to port 1/0/13.
(Netgear Switch) (Config)#interface 1/0/13
(Netgear Switch) (Interface 1/0/13)#service-policy in policy_vlan
(Netgear Switch) (Interface 1/0/13)#exit
(Netgear Switch) (Config)#exit
Web Interface: Configure a Color Conform Policy
1. Create a VLAN.
a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the
following displays.
b. In the VLAN ID field, enter 5.
c. Click Add.
2. Add ports 1/0/13 and 1/0/25 to VLAN 5.
Chapter 12. DiffServ | 209