NETGEAR ProSafe GSM5212P Software Administration Manual page 425

ProSafe Managed Switch
a. Select Routing > Multicast > Global Configuration. A screen similar to the
following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
9. Enable PIM-DM globally.
a. Select Routing > Multicast > PIM > Global Configuration. A screen similar to the
following displays.
b. For PIM Protocol Type, select the PIM-SM radio button.
c. For Admin Mode, select the Enable radio button.
d. Click Apply.
10. Enable PIM-DM on interfaces 1/0/21,1/0/22, and 1/0/24.
Chapter 28. PIM | 425