NETGEAR ProSafe GSM5212P Software Administration Manual page 266

b. For Current Network Configuration Protocol, select the None radio button.
c. In the IP Address field, enter 192.168.0.5.
d. In the Subnet Mask field, enter 255.255.255.0.
e. Click Apply.
2. Create VLAN 2000.
a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the
following displays.
b. In the VLAN ID field, enter 2000.
c. In the VLAN Type field, select Static.
d. Click Add.
3. Set force authorized mode on ports 1/0/6 and 1/0/12.
a. Select Security > Port Authentication > Advanced > Port Authentication. A
screen similar to the following displays.
b. Under Port Authentication, scroll down and select the 1/0/6 and 1/0/12 check boxes.
c. In the Control Mode list, select Force Authorized.
d. Click Apply to save settings.
266 | Chapter 15. Security Management
ProSafe Managed Switch