Enable System Time To Synchronize With An Sntp Server - NETGEAR GS316EP User Manual

11. In the Priority field, set a priority from 1 to 3, with the lowest number assigned to
the preferred SNTP server.
12. In the Version field, set the SNTP version from 1 to 4.
13. Click the APPLY button.
Your settings are saved.
The SNTP server information displays in a table.

Enable system time to synchronize with an SNTP server

The local system time on the switch can be set to sync with an SNTP server when the
following conditions are met:
• The SNTP client mode is configured.
• The switch can contact a configured SNTP server.
For more information, see Configure an SNTP server on page 89
To enable system time to synchronize with SNTP server time:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. In the SYSTEM TIME section, click the down arrow to expand the menu.
The system time options display.
5. Click the SNTP button to turn it green.
6. From the Time Zone menu, select the time zone in which the switch operates.
7. Click the APPLY button.
Your settings are saved.
The current system date and time display next to the menu icon.
Maintain and Monitor the Switch
Gigabit Ethernet Plus Switches
90 User Manual