a. Select Routing > RIP > Advanced > Interface Configuration. A screen similar to
the following displays.
b. In the Interface list, select 1/0/11.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
6.
Enable multicast globally.
a. Select Routing > Multicast > Global Configuration. A screen similar to the following
displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
7.
Enable PIM-DM globally.
a. Select Routing > Multicast > PIM > Global Configuration. A screen similar to the
following displays.
416 |
Chapter 28. PIM
ProSafe Managed Switch