NETGEAR ProSafe GSM5212P Software Administration Manual page 305

ProSafe Managed Switch
CLI: show network
(Netgear Switch Routing) >telnet 192.168.77.151
Trying 192.168.77.151...
(Netgear Switch Routing)
User:admin
Password:
(Netgear Switch Routing)
Password:
(Netgear Switch Routing)
IP Address............................... 192.168.77.151
Subnet Mask.............................. 255.255.255.0
Default Gateway.......................... 192.168.77.127
Burned In MAC Address.................... 00:10:18.82.04:E9
Locally Administered MAC Address......... 00:00:00:00:00:00
MAC Address Type......................... Burned In
Network Configuration Protocol Current... DHCP
Management VLAN ID....................... 1
Web Mode................................. Enable
Java Mode ............................... Disable
CLI: show telnet
(Netgear Switch Routing)#show telnet
Outbound Telnet Login Timeout (minutes)........ 5
Maximum Number of Outbound Telnet Sessions..... 5
Allow New Outbound Telnet Sessions............. Yes
>en
#show network
Chapter 17. Tools | 305