NETGEAR ProSafe GSM5212P Software Administration Manual page 431

ProSafe Managed Switch
(Netgear Switch) (Config)#interface 1/0/24
(Netgear Switch) (Interface 1/0/24)#routing
(Netgear Switch) (Interface 1/0/24)#ip address
(Netgear Switch) (Interface 1/0/24)#ip rip
(Netgear Switch) (Interface 1/0/24)#ip igmp
(Netgear Switch) (Interface 1/0/24)#ip pim sparse
(Netgear Switch) (Interface 1/0/24)#exit
PIM-SM builds the multicast route table on each switch. The following tables show the routes
that are built after PIM-SM switches to the source-specific tree from the shared tree.
(A) #show ip mcast mroute summary
Source IP Group IP
----------- ---------
192.168.1.1 225.1.1.1
(B) #show ip mcast mroute summary
Source IP Group IP
----------- ----------
192.168.1.1 225.1.1.1
(C) #show ip mcast mroute summary
Source IP Group IP
------------ ---------
* 225.1.1.1
192.168.1.1 225.1.1.1
(D) #show ip mcast mroute summary
Source IP Group IP
---------- -----------
* 225.1.1.1
192.168.1.1 225.1.1.1
Multicast Route Table Summary
Protocol
---------
PIMSM
Multicast Route Table Summary
Protocol
---------
PIMSM
Multicast Route Table Summary
Protocol
----------
PIMSM
PIMSM
Multicast Route Table Summary
Protocol
----------
PIMSM
PIMSM
192.168.4.1 255.255.255.0
Incoming Outgoing
Interface Interface List
--------- ---------------
1/0/13 1/0/1
Incoming Outgoing
Interface Interface List
--------- ---------------
1/0/10
Incoming Outgoing
Interface Interface List
--------- ---------------
1/0/22
1/0/21
Incoming Outgoing
Interface Interface List
--------- ---------------
1/0/22 1/0/24
1/0/21 1/0/24
Chapter 28. PIM | 431