NETGEAR ProSafe GSM5212P Software Administration Manual page 433

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

ProSafe Managed Switch

a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to

the following displays.

b. Scroll down and select the interface 1/0/9 check box. Now 1/0/9 appears in the

Interface field at the top.

c. Enter the following information:

In the IP Address field, enter 192.168.3.1.

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

d. Click Apply.

Configure 1/0/13 as a routing port and assign an IP address to it.

a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to

the following displays.

b. Scroll down and select the interface 1/0/13 check box. Now 1/0/13 appears in the

Interface field at the top.

c. Enter the following information:

In the IP Address field, enter 192.168.1.2.

Chapter 28. PIM