NETGEAR ProSafe GSM5212P Software Administration Manual page 435

ProSafe Managed Switch
a. Select Routing > RIP > Advanced > Interface Configuration. A screen similar to
the following displays.
b. Select 1/0/13 in the Interface field.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
8. Enable multicast globally.
a. Select Routing > Multicast > Global Configuration. A screen similar to the
following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
9. Enable PIM-SM globally.
a. Select Routing > Multicast > PIM > Global Configuration. A screen similar to the
following displays.
Chapter 28. PIM | 435