NETGEAR ProSafe GSM5212P Software Administration Manual page 136

a. Select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following
displays.
b. Enter the following information:
• In the Vlan ID field, enter 24.
• In the IP Address field, enter 192.168.24.1.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 24 twice until U displays. The U specifies that the
egress packet is untagged for the port.
e. Click Apply to save VLAN 24.
2. Create VLAN 48 with IP address 192.168.48.1.
a. Select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following
displays.
b. Enter the following information:
• In the Vlan ID field, enter 48.
• In the IP Address field, enter 192.168.48.1.
• In the Network Mask field, enter 255.255.255.0.
136 | Chapter 10. ACLs
ProSafe Managed Switch