Operating Procedure - Brother BAS-761 Instruction Manual

Operating procedure

1
Programming
1. Press .
P
The work clamp comes down and the programmer screen is displayed.
2. Select with
3. Move the needle with
the needle point is at point A of the pattern.
The first stitch (point A) is programmed.
4. Select with
5. Input the stitch length, then press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
6. Move the needle with
the needle point is at point B of the pattern.
7. When point B is programmed, press
8. Select with
9. Input the stitch length, then press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
10. Move the needle with
the needle point is at point C of the pattern.
, then press .
. Press when
, then press .
.
. Press when
twice.
ESC ESC
, then press .
.
. Press when
Programmer
Chapter 5 Practical programming examples
145