Adding Shunting Point Before The First Stitch - Brother BAS-761 Instruction Manual

Adding shunting point before the first stitch

The shunting point is a provisional point provided for prevention of the work clamp interference with impediments
on it when it moves directly from the standby position to the sewing start position.
1
Calling data
1. Specify the program number on the operation
panel, then press
Refer to "Using the operation panel of the main body"(page 128)
for detailed operation.
2
Moving to position 1
1. Press , then press
1
The needle moves to the sewing start position.
3
Programming a new point
1. Press .
F
2. Move the needle with
needle point is at A of the pattern.
Record the coordinates (values of
3. Press .
L
A is programmed.
4. Press .
F
5. Move the needle with
position of coordinates recorded in step 2, then
press .
L
An shunting point is added before the sewing start
position. The example in the left is used for explanation
of setting shunting point A.
switch to read the data.
.
so that the
and ).
to the opposite
Programmer
Chaprter 3 Programming with Command Function
99