Brother BAS-761 Instruction Manual page 31

Chapter 2 Programming with Help Function
7. Press .
8. Move the needle with
twice when the needle point is at point B of
the pattern.
9. Program points C, D and E.
10. When point E is programmed, press
again.
11. Program point F.
12. When point F is programmed, press
again.
13. Press .
The needle moves to points G and H.
14. When the needle stops, press
times.
2
Inputting the end code
1. Select with
2. Press .
Press and the needle returns to the first stitch(point A).
3. Press .
ESC ESC
The needle returns to the standby position.
30
. Press
three
ESC ESC
, then press .
Programmer