Adding Sewing Point Before The First Stitch - Brother BAS-761 Instruction Manual

4. The needle point moves to 1'.
5
Saving
1. Specify the program number on the operation
panel, then press
floppy disk.
Refer to "Using the operation panel of the main body"(page 131)
for detailed operation.
6
Ending program
1. Press .
P

Adding sewing point before the first stitch

1
Calling data
1. Specify the program number on the operation
panel, then press
Refer to "Using the operation panel of the main body"(page 128)
for detailed operation.
2
Moving to position 1
1. Press , then press
1
The needle moves to the sewing start position.
switch for writing into the
A point is added before the current sewing point to
change the sewing start position.
The example in the left is used for explanation of
changing the sewing start position from 1 to 1'.
switch to read the data.
.
Programmer
Chaprter 3 Programming with Command Function
97