Double Stitch - Brother BAS-761 Instruction Manual

Chapter 3 Programming with Command Function
4
Ending program
1. Press .
P

Double stitch

Sewing
width
When the line changes from straight to curve or curve to straight as in points B or E, be sure to press
to make a split.
More intermediate points such as points C or D will create smooth curves.
1
Programming
1. Press .
P
The work clamp comes down and the programmer screen is
displayed.
2. Move the needle with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
3. Press
2 3
is the command for the double stitch. Input the
2
width of the double stitch in
example.
4. Input the stitch length, then press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
5. Create the program to point F in the similar
manner of curve program.
If a straight line is present as in the example, press
7 8 9 L
the straight, and vice versa.
88
, then press .
M
0
. 3.0 mm is input in the
in the position where the curve is changed to
L
A double stitch is programmed to make two lines
with a constant width.
The example in the left is used for explanation of a
double stitch to the right of sewing direction.
. Press
L
.
M
Programmer
7 8 9 L