Editing The Current Data - Brother BAS-761 Instruction Manual

Editing the current data

Data of the needle position after a certain position can be moved.
The following options are available as editing functions.
Moving data of the needle position after the current position in parallel by feeding
Moving data of the needle position after the current position in parallel by stitching
with the specified stitch length.
Moving data of the needle position after the current position in parallel by stitching
when the moving distance is 6.0 mm or less and by feeding if it is more than 6.0 mm.
Offsetting double stitch data to the left side of the sewing path
Offsetting double stitch data to the right side of the sewing path
Adjust the needle position before editing.
Refer to "Checking the program setting and setting attribute" (page 69) for adjustment.
1. Select , then press
By feeding
By stitching with the
specified stitch length
All the stitches after A
are moved in parallel.
.
Programmer
Chapter 2 Programming with Help Function
63