Needle Racking - Brother BAS-761 Instruction Manual

Chapter 2 Programming with Help Function

Needle racking

Zigzag
width
Stitch length
Tacking width is set with the dial on the back of the top part of
the machine while needle tacking length is set with the pro-
grammer. Values 1.0 to 3.5 mm are available for the tacking
width.
Values 0.1 to 1.0 mm are available for the stitch length.
The needle actually drops at the point B' because needle tacking is conducted on the machine side. However, point
B of the program is created on the straight line between point A and point C.
1
Programming
1. Create the program to point A.
2. Select with
3. Input the stitch length, then press
0.5 mm is input in the example.
Input 050 to make the width and the stitch length to 0.5 mm.
4. Move the needle with
when the needle point is at point B of the
pattern.
5. Press twice.
ESC ESC
6. Continue programming.
34
Needle tacking is programmed.
, then press .
.
. Press
Programmer