Brother BAS-761 Instruction Manual page 37

Chapter 2 Programming with Help Function
2
Resizing
1. Select with
2. Select with
3. Input the resizing percentage for the X and
the Y axes.
110% is input in the example.
To magnify the pattern by 110%, input 110.
4. Select the stitch length with
numerical value, then press
If the stitch length is 0.0, the pattern is resized with the same
number of stitches as the original data.
Stitch length of the needle tacking data is not changed.
5. Press .
Calculation is made. The pattern is resized.
3
Saving
Refer to "Writing data" (page 129) for detailed operation.
1. Select with
2. Select with
3. Input the program number, then press
4. Press .
ESC ESC
36
, then press .
, then press
and input the
.
, then press .
, then press .
Programmer
.
.