Setting Neddle Tacking In A Unit Of One Stitch; Setting Two Step Tension Output - Brother BAS-761 Instruction Manual

Setting needle tacking in a unit of one stitch
Command to be used
3 3 3 L
3 3 4 L
1. Move to the desired needle position.
Refer to page 112 on how to move the needle position.
2. Input the command of needle tacking.
Displays the number of the command input.

Setting two step tension output

Command to be used
3 3 L
3
3 3 4 L
1. Move to the desired needle position.
Refer to page 112 on how to move the needle position.
2. Input the command of two step tension output.
Displays the number of the command input.
Setting needle tacking.
Canceling needle tacking.
Indicates when it is set.
Setting two step tension output.
Canceling two step tension output.
Indicates when it is set.
Programmer
Chapter 3 Programming with Command Function
113