Checking Attributes - Brother BAS-761 Instruction Manual

Chapter 3 Programming with Command Function
Attributes in the current needle position are displayed on the programmer screen.
The needle position can be moved as follows.
Checking each stitch
1.
Checking a series of stitches automatically
1.
2.
112

Checking attributes

* Check each stitch.
* Check a series of stitches automatically.
Press to move forward,
The needle steps by each stitch and the setting of the data is displayed.
Input the stitch count to check.
Press to move forward,
The needle moves by the input count and the setting of the data is displayed.
Input "999" to check all stitches.
to backward.
to backward.
This screen is displayed while the needle is moving.
This screen is displayed after the needle has stopped.
Programmer