Programming; Creating A Line; Creating Tacking Data - Brother BAS-761 Instruction Manual

Chapter 2 Programming with Help Function

Programming

1.
2.
3.
Values 0.1 to 1.0 mm are available for the stitch length.
Tacking width of the needle is set with the
dial on the back of the top part of the
machine. Values 1.0 to 3.5 mm are available
for the tacking width.
1.
58

Creating a line

Select , then press
Input the stitch length, then press
Stitch length
Move the needle with

Creating tacking data

Select , then press
.
.
, then press
Remaining plot count
.
Programmer
.
Distance from the previous point in the
direction of X or Y axis