Operating Precautions; Power Supply Precautions - Brother 882-T52 Operation Manual

OPERATING PRECAUTIONS

The necessary points to ensure the correct operation of this machine are described below.

Power supply precautions

Be sure to observe the following precautions concerning the power supply.
• Use only regular household electricity for the power source. Using other power sources may result in fire,
electric shock, or damage to the machine.
• Do not plug in or unplug the power supply cord with wet hands, otherwise an electric shock may result.
• If any of the following occur, turn off the machine and unplug the power supply cord, otherwise a fire, an
electric shock or damage to the machine may result.
• When you are away from the machine.
• After using the machine.
• If a power outage occurs while the machine is being operated.
• If the machine is not operating properly, for example, when there is a loose or cut connection.
• During electrical storms.
• Do not plug this machine in with extension cords or multi-plug adapters with any other appliances
plugged into them, otherwise a fire or an electric shock may result.
• When unplugging the power supply cord, be sure to first turn off the machine, and then grasp the plug
when unplugging the cord. Pulling on the cord may damage it or result in a fire or an electric shock.
• Do not allow the power supply cord to be cut, damaged, modified, forcefully bent, pulled, twisted, or
bundled. In addition, do not place heavy objects on the cord or expose it to heat, otherwise damage to the
cord, fire or an electric shock may result. If the power supply cord or its plug is damaged, stop using the
machine, and then take the machine to your authorized Brother dealer for repairs before continuing use.
WARNING
CAUTION
15