Brother BAS-761 Instruction Manual page 140

11. Press .
The attribute setting screen appears.
12. Select with
It is set to ON.
13. Press .
14. Input the number of stitches to proceed the
needle to point E, then press
5 is input in the example. The needle moves 5 stitches ahead.
15. Press .
16. Select with
17. Input the stitch length of needle tacking, then
press .
0.5 mm is input in the example.
Input 005 to make the stitch length to 0.5 mm.
18. Move the needle with
the needle point is at point F of the pattern.
19. Press twice.
ESC ESC
20. Select with
, then press .
.
, then press .
. Press when
, then press .
Programmer
Chapter 5 Practical programming examples
139