Creating A Curve - Brother BAS-761 Instruction Manual

Chapter 3 Programming with Command Function
Command to be used
Increase the number of plotting points to create a smoother curve.
One to 99 points are available for plotting.
1.
2.
3.
4.
106

Creating a curve

0 M
8 9 L
7
Select the start point with
Input the stitch length in 3 digits, then press
Displays the number of the command input.
Move the needle with
plotted.
Input
7 8 9 L
Displays the number of the command input.
Input the stitch length in
Example Pitch
0.5mm
3.0mm
This command represents completing creation of a curve.
, then press
, then press
at the end position of the needle.
Programmer
.
Input
005
030
.
L
.
M
in the position to be
L