Brother BAS-761 Instruction Manual page 75

Chapte 2 Programming with Help Function
If
The center point (reference point) of resizing is as follows.
All the settings of attributes become invalid if the pattern is resized without changing the
stitch length. Set the attributes after resizing the pattern.
1.
2.
3.
If
1.
2.
74
is selected
X coordinate : Center of the outer shape of the data
Y coordinate : Uppermost position of the data
Input resizing scale in the X and Y directions.
Switch between X and Y directions with
Resizing scale between 90 and 110% are available.
Input the stitch length.
Switch between input fields of stitch length with
If the stitch length is 0.0, the pattern is resized with the same number of stitches as the original data.
Press .
or is selected
Input the angle of rotation, then press
Adjust the reference position for rotation with
.
.
Angle
Reference position
Programmer
.
, then press .