Operating Procedure; Setting The Program Number; Setting The X-Scale And Y-Scale; Setting The Sewing Speed - Brother LK3-B448E Instruction Manual

5. Operation

5-2 . Operating procedure

NOTE:
Be sure to check the sewing pattern (refer to page 20) after setting has been completed to make sure that the needle drops
down into the hole of the button.
Preparation
Turn on the power switch.
(The POWER indicator q will illuminate and the pro-
gram number will flash in the display window !4 4 . )

5-2-1 . Setting the program number

Determine the appropriate program from the program list which is given on pp. 3 - 5.
Press the SELECT switch y
1
until the PROGRAM NO. in-
dicator illuminates.
PROGRAM NO.
P
X - SCALE
Y - SCALE
SPEED
S E L E C T
COUNTER

5-2-2 . Setting the X-scale and Y-scale

Press the SELECT switch y
1
until the X-scale or Y-scale
indicator illuminates.
PROGRAM NO.
P
X - SCALE
Y - SCALE
SPEED
S E L E C T
COUNTER

5-2-3 . Setting the sewing speed

Press the SELECT switch y
1
until the SPEED indicator il-
luminates.
PROGRAM NO.
P
X - SCALE
Y - SCALE
SPEED
S E L E C T
COUNTER
26
2
Press the DISPLAY SET
switches !2 until the desired
program number is flashing in
the display window.
y
2 Press the DISPLAY SET
switches !2 until the desired
scale setting is flashing in the
display window.
displayed as a percentage.)
y
Press the DISPLAY SET
2
switches ! 2 until the de-
sired speed setting is flashing
in the display window.
y
LK3-B448E MARK
Factory default
Program No.
X-scale (%)
Y-scale (%)
Speed (rpm)
* For checking the origin points for X and Y feed
3
1st step
2nd step
This completes the setting of the program
!2
number.
3
(The setting is
1st step
2nd step
!2
This completes the setting of the X-scale
or Y-scale.
!2
/BA-16
II
Variable range
00 * 01 - 49
100 20 - 200
100 20 - 200
2000 1,000 - 2,500
Depress the foot switch to the
second step.
* The display will stop flashing and
illuminates steadily, and the feed
mechanism will move to the sew-
ing start position.
Depress the foot switch to the
second step.
* The display will stop flashing and
illuminates steadily, and the feed
mechanism will move to the sew-
ing start position.