Chapter 2 Programming with Help Function
Lines
1
Programming
1. Press
.
P
The work clamp comes down and the programmer screen is
displayed.
2. Select
with
3. Move the needle with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Select
with
5. Input the stitch length, then press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
6. Move the needle with
when the needle point is at point B of the
pattern.
7. Repeat step 6 and create the program to
point E.
8. When point E is programmed, press
twice.
24
The pattern with lines is programmed.
The example in the left is used for explanation of
programming.
, then press
.
. Press
, then press
.
. Press
Programmer
.
ESC
ESC