Feed - Brother BAS-761 Instruction Manual

3
Saving
Refer to "Writing data" (page 129) for detailed operation.
1. Select with
2. Select with
3. Input the program number, then press
4. Press .
ESC ESC
4
Ending program
1. Press .
P

Feed

1
Programming
1. Press .
P
The work clamp comes down and the programmer screen is
displayed.
2. Select with
, then press .
, then press .
After breaking thread halfway through sewing, a feed
is set to start sewing again from a different position.
The example in the left is used for explanation of
programming an inner pattern with a feed after an
outer pattern.
, then press .
Programmer
Chapter 2 Programming with Help Function
.
31