Brother BAS-761 Instruction Manual page 148

23. Select with
It is set to ON.
24. Press .
25. Input the number of stitches to proceed the
needle to point M, then press
5 is input in the example. The needle moves 5 stitches ahead.
26. Press .
ESC ESC
27. Select with
28. Input the stitch length of needle tacking, then
press .
0.5 mm is input in the example.
Input 005 to make the stitch length to 0.5 mm.
29. Move the needle with
the needle point is at point N of the pattern.
30. Press twice.
ESC ESC
31. Select with
32. Input the stitch length, then press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
, then press .
.
, then press .
. Press when
, then press .
.
Programmer
Chapter 5 Practical programming examples
147