Chapter 2 Programming with Help Function
Curve
Be sure to press
twice for a split at corner point E. If a split is not made, the corner will be round.
When a split is made
More intermediate points such as points B, C, D, F, G or H will create smooth curves.
1
Programming
1. Press
.
P
The work clamp comes down and the programmer screen is
displayed.
2. Select
with
3. Move the needle with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Select
with
26
The pattern with curves is programmed.
The example in the left is used for explanation of
programming at the curve and the corner.
When a split is not made
, then press
.
. Press
, then press
Programmer
.