Interface No Command Examples; No Bandwidth-Limit - ZyXEL Communications Dimension GS-4024 User Manual

GS-4012F/4024 User's Guide
An example is shown next.
• Select ports 3-6 for internal loopback test.
• Execute the test command.
• View the results.
sysname(config)# interface port-channel 3-6
sysname(config-interface)# test 3-6
Testing internal loopback on port 3 :Passed!
Ethernet Port 3 Test ok.
Testing internal loopback on port 4 :Passed!
Ethernet Port 4 Test ok.
Testing internal loopback on port 5 :Passed!
Ethernet Port 5 Test ok.
Testing internal loopback on port 6 :Passed!
Ethernet Port 6 Test ok.

45.3 Interface no Command Examples

Similar to the no commands in the Enable and Config modes, the no commands for the
Interface sub mode also disable certain features. In this mode, however, this takes place on a
port by port basis.

45.3.1 no bandwidth-limit

You can disable bandwidth limit on port 1 simply by placing the
bandwidth-limit
Syntax:
no bandwidth-limit
An example is shown next:
• Disable bandwidth limit on port1
sysname(config)# interface port-channel 1
sysname(config-interface)# no bandwidth-limit
318
command.
command in front of the
no
Chapter 45 Interface Commands