Resetting To The Factory Default; No Command Examples; No Mirror-Port; Figure 144 Cli: Reload Config Command Example - ZyXEL Communications ZyXEL Dimension ES-4024 User Manual

ES-4024A User's Guide

Figure 144 CLI: reload config Command Example

ras# reload config 2
Note: When you use the
file index number, the switch saves the changes to the configuration file the
switch is currently using.

38.5.1 Resetting to the Factory Default

Follow the steps below to reset the switch back to the factory defaults.
1 Enter
erase running config
2 Enter
write memory
The following example resets configuration file to the factory default settings.

Figure 145 CLI: Reset to the Factory Default Example

ras# erase running-config
ras# write memory

38.6 no Command Examples

These are the commonly used command examples that belong to the

38.6.1 no mirror-port

Syntax:
Disables port mirroring on the switch.
An example is shown next.
234
write memory
to reset the current running configuration.
to save the changes to the configuration file.
no mirror-port
command without specifying a configuration
Chapter 38 Command Examples
group of commands.
no