Ping; Traceroute - ZyXEL Communications Dimension GS-4024 User Manual

GS-4012F/4024 User's Guide
This command displays the MAC address(es) stored in the switch. The following example
shows the static MAC address table.
sysname# show mac address-table static
Port
CPU
sysname#

43.3 ping

Syntax:
ping <ip|host-name> < [in-band|out-of-band|vlan <vlan-id> ] [size
-> <0-1472>] [-t]>
where
<ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id>]
[size <0-1472>]
[-t]
This command sends Ping packets to an Ethernet device. The following example sends Ping
requests to and displays the replies from an Ethernet device with an IP address of
192.168.1.100
sysname# ping 192.168.1.100
sent rcvd
1
2
3
sysname#

43.4 traceroute

Syntax:
traceroute <ip|host-name> [in-band|out-of-band|vlan <vlan-id>][ttl
-> <1-255>] [wait <1-60>] [queries <1-10>]
294
VLAN ID MAC Address
1 00:a0:c5:01:23:46
= The IP address or host name of an Ethernet device.
= Specifies the network interface or the VLAN ID to which the
Ethernet device belongs.
out-of-band
means the other ports on the switch.
= Specifies the packet size to send.
= Sends Ping packets to the Ethernet device indefinitely. Press
[CTRL]+ C
.
rate rtt avg
1 100 0
2 100 0
3 100 0
Type
Static
refers to the management port while
to terminate the Ping process.
mdev max
0 0 0
0 0 0
0 0 0
Chapter 43 User and Enable Mode Commands
in-band
min reply from
0 192.168.1.100
0 192.168.1.100
0 192.168.1.100