GS-4012F/4024 User's Guide
Table 70 IP Multicast
LABEL
DESCRIPTION
Port
This read-only field displays the port number.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first
to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make
IP
The switch removes the VLAN tag from IP multicast packets belonging to the specified
Multicast
VLAN before transmission on this port.
Egress
Enter a VLAN group ID in this field. Enter 0 to set the switch not to remove any VLAN tags
Untag
from the packets.
Vlan ID
Apply
Click Apply to save your changes to the switch's run-time memory. The switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to reset the fields to your previous configuration.
188
them.
Chapter 28 IP Multicast