Figure 130 Access Control: Logins; Table 87 Access Control: Logins - ZyXEL Communications Dimension GS-4024 User Manual

• A non-administrator (username is something other than admin) is someone who can
view but not configure switch settings.
Click Access Control from the navigation panel and then click Logins from this screen.

Figure 130 Access Control: Logins

The following table describes the labels in this screen.

Table 87 Access Control: Logins

LABEL
Administrator
This is the default administrator account with the "admin" user name. You cannot change the default
administrator user name. Only the administrator has read/write access.
Old Password
New Password
Retype to confirm Retype your new system password for confirmation
Edit Logins
You may configure passwords for up to four users. These users have read-only access. You can give
users higher privileges via the CLI. For more information on assigning privileges see
page 253.
User Name
Password
Retype to confirm Retype your new system password for confirmation
Chapter 33 Access Control
DESCRIPTION
Type the existing system password (1234 is the default password when
shipped).
Enter your new system password.
Set a user name (up to 32 ASCII characters long).
Enter your new system password.
GS-4012F/4024 User's Guide
Chapter 42 on
219