GS-4012F/4024 User's Guide
Table 106 Command Summary: Configuration Mode (continued)
COMMAND
classifier
<name> <[packet-
format
<802.3untag|802.3
tag|
EtherIIuntag|
EtherIItag>]
[priority <0-7>]
[vlan <vlan-
id>][ethernet-
type <ether-
num|ip|ipx|
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac <src-
mac-addr>]
[source-port
<port-num>]
[destination-mac
<dest-mac-addr>]
[dscp <0-63> ]
[ip-protocol
<protocol-
num|tcp|udp|icmp|
egp|
ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip <src-
ip-addr> [mask-
bits <mask-
bits>]] [source-
socket <socket-
num>]
[destination-ip
<dest-ip-addr>
[mask-bits <mask-
bits>]]
[destination-
socket <socket-
num>] [inactive]>
help
cluster
<vlan-id>
member <mac-
address> password
<password-str>
name <cluster
name>
rcommand <mac-
address>
268
DESCRIPTION
Configures a classifier. A
classifier groups traffic into data
flows according to specific criteria
such as the source address,
destination address, source port
number, destination port number
or incoming port number.
Displays help information for this
command.
Enables clustering in the
specified VLAN group.
Sets the cluster member.
Sets a descriptive name for the
cluster.
Logs into the CLI of the specified
cluster member.
Chapter 42 Introducing Commands
PRIVILEGE
13
13
13
13
13
13