Figure 100 Dhcp: Server; Table 75 Dhcp: Server - ZyXEL Communications Dimension GS-4024 User Manual

Figure 100 DHCP: Server

The following table describes the labels in this screen.

Table 75 DHCP: Server

LABEL
VID
Client IP Pool
Starting
Address
Size of Client IP
Pool
IP Subnet Mask Enter the subnet mask for the client IP pool.
Default
Gateway
Primary/
Secondary
DNS Server
Add
Cancel
Clear
VID
Type
DHCP Status
Delete
Cancel
Chapter 30 DHCP
DESCRIPTION
Enter the ID number of the VLAN group to which this DHCP settings apply.
Specify the first of the contiguous addresses in the IP address pool.
Specify the size, or count of the IP address pool.
Enter the IP address of the default gateway device.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
Click Add to save your changes to the switch's run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields to your previous configurations.
Click Clear to reset the fields back to the factory defaults.
This field displays the ID number of the VLAN group to which this DHCP settings
apply.
This field displays Server for the DHCP mode.
This field displays the starting and the size of DHCP client IP address.
Click Delete to remove the selected entry.
Click Cancel to clear the Delete check boxes.
GS-4012F/4024 User's Guide
195