ZyXEL Communications Dimension GS-4024 User Manual page 97

GS-4012F/4024 User's Guide
Table 20 FIltering (continued)
LABEL
Action
MAC
VID
Add
Cancel
Clear
Index
Active
Name
MAC
Address
VID
Delete
Cancel
96
DESCRIPTION
Select Discard source to drop frame from the source MAC address (specified in the
MAC field). The switch can still send frames to the MAC address.
Select Discard destination to drop frames to the destination MAC address (specified in
the MAC address). The switch can still receive frames originating from the MAC
address.
Select Discard source and Discard destination to block traffic to/from the MAC
address specified in the MAC field.
Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs.
Type the VLAN group identification number.
Click Add to save your changes to the switch's run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields to your previous configuration.
Click Clear to clear the fields to the factory defaults.
This field displays the index number of the rule. Click an index number to change the
settings.
This field displays Yes when the rule is activated and No when is it deactivated.
This field displays the descriptive name for this rule. This is for identification purpose
only.
This field displays the source/destination MAC address with the VLAN identification
number to which the MAC address belongs.
This field displays the VLAN group identification number.
Check the rule(s) that you want to remove in the Delete column and then click the
Delete button.
Click Cancel to clear the selected checkbox(es) in the Delete column.
Chapter 10 Filtering